To clean the surface, use
a damp cloth or sponge and a mild soap or detergent. Difficult
stains such as coffee or tea can be removed using a mild
household cleaner and baking soda; mixing to achieve a paste
consistency. Use a stiff nylon bristle brush, scrubbing (approx.
15-20 strokes) the affected area. Do not scrub so as to mar
(damage, scratch) the surface finish.
Stubborn
stains that resist any of the above cleaning methods may
require the use of undiluted household bleach or nail polish
remover. Use a cotton ball saturated with bleach or nail
polish remover (acetone), gently rub the stain for up to
two minutes. Rinse thoroughly with warm water and wipe
dry using a soft cloth. This step may be repeated if the
stain appears to be going away and the color of the laminate
has not been affected.
WARNING: Prolonged
exposure of the laminate surface to bleach will cause discoloration.
Always rinse laminate surfaces after cleaning! Failure
to rinse after cleaning can cause damage; even if a small
amount of cleaning solution remains on the surface. A dry
residue may be invisible; however, moisture from cups or
drinks can reactivate it, and result in permanently etched
scars or stains over time.
Acidic or abrasive
cleaners can damage laminate surfaces; do not use them.
Drain cleaners containing lye will permanently damage the
laminate surface. If you spill a drain cleaner, wipe it
up immediately and rinse several times with water.
Hair, textile and food dyes can cause
permanent stains. If dye should happen to spill, wipe it
up immediately with dishwashing detergent or an all-purpose
cleaner.
Steel wool and other abrasive pads will
damage the laminate face. Do not use them for cleaning and
don’t store steel wool pads on your countertop; the
metal can rust and leave stains.
Toilet bowl cleaners contain harsh chemicals
that can cause permanent damage. If spills occur, wipe up
immediately, wash surface with soapy water and rinse several
times.
